产品资料

干式恒温解冻仪

如果您对该产品感兴趣的话,可以
产品名称: 干式恒温解冻仪
产品型号: Jipad-8GL
产品展商: Jipad上海旌派
产品文档: 无相关文档

简单介绍

上海旌派干式恒温解冻仪 目前恒温解冻仪(立式)规格:4蓝,6蓝,8蓝,10蓝,12蓝型号: Jipad-4GL Jipad-6GL Jipad-8GL Jipad-10GL Jipad-12GL


干式恒温解冻仪  的详细介绍
上海旌派干式恒温解冻仪干式恒温解冻仪-实验室仪器产品详细介绍
干式恒温解冻仪-立式产品说明 Product description
恒温解冻仪,隔水式恒温解冻仪:是将浆袋放在融浆水囊与水囊之间,按启动键后,热水自动注入水袋内,进行循环融浆。使浆袋在融化过程中始终不接触水,保持真正意义上的干式融浆。整个流程都是全自动智能电脑控制,自动调温,自动加水处理.干式隔水膜袋使用医用绿色新型材料制成,无任何耗材、无限使用寿命长。
干式恒温解冻仪-立式应用范围 Application range
适用于医用中心,临床输科、医院、制品生产单位,医学实验室,全自动处理,无需人工值守,自动完成工序,为使用快速节省了时间,方便了医务工作者,是理想的配套工具。节能减排、节约水资源;融浆过程不使用一次性塑料袋包裹浆袋,保护环境减少污染。
上海旌派干式恒温解冻仪恒温解冻仪-立式主要特征 Principal character
1、样品容量:8、12、16、20、24袋
2、微电脑全程控制,双金属片两级温控系统,超温自动报警并切断电源多重视听报警系统,待机、融化等工作模式。 显示器实时显示数字水温度和融化时间
3、全自动自动调节温度,自动加水处理,自动定时设置时间,到达时报警提示。干式隔水膜袋是使用医用绿色新型材料制成,无毒味,无限使用寿命长.
4、全自动加热是由自动测温器、温度传感器、传感电缆和高效加热组成,加热精度高于±0.5,融化使用专门设计的的“水循环”系统,避免血浆内纤维蛋白析出
5、自动水位检测:自动加水处理,如没有连接水管,低水位时自动报警,并且自动停止加热,防止干烧。 
6、全自动调节温度:30℃-45℃可任意调用,全自动智能温度计进行校准。水温度差不大于0.5℃,保证血浆的平均融化。水箱密封,长期不用换水,节约资源减轻换水负担。
7、如有浆袋破裂因有隔水膜袋包裹,不会造成过量渗漏,污染水箱及环境.
上海旌派干式恒温解冻仪干式恒温解冻仪-立式技术参数 Technical parameter
型号: Jipad-4GL Jipad-6GL Jipad-8GL Jipad-10GL Jipad-12GL 
样式方式: 立式(操作使用更方便,不必放桌台)
融化方式: 干式隔水融化(目前对融化有要求都是用干式隔水融化,不接触样品)。 
融化温度:30℃~45℃可任意调温。
解冻时间:10~20分钟(1栏可处理2袋100ml/200ml,-20℃,扁平袋)。 
可调时间:1-99.5分钟。 
温度控温精度:±0.5。 
加热装置:由自动测温器、温度传感器、传感电缆和高效加热组成。 
显示屏:数字显示水温和所剩下的融化时间。 
电源:220V/50HZ。 
功率:1800W。
振动方式:循环式。循环泵流量:15L
控制系统:微电脑全程控制,多重视听蜂鸣提示系统,待机、融化等工作模式。 
定时报警:设置时间到达时蜂鸣提示。 
水位检测:低水位时自动蜂鸣提示,并且自动停止加热。 
温度校准:用标准温度计进行校准。
干式恒温解冻仪-立式型号选择 Model selection
多功能恒温解冻仪由于血浆袋在低温冰冻过程中脆性增强及运输周转等因素,容易造成不同程度破坏渗漏。由于破坏程度不同,渗漏程度也不相同。破损较大使渗漏明显时,用肉眼观察及擦式或挤压等方法即可查出。有破损微孔时,因血浆黏稠度高而不会渗出,加之血浆袋外部被水侵泡后的潮湿使肉眼观察和其他检查难以分辨。此时若用水浸泡方法融化血浆时,在血浆渗透压和血浆袋周围水的压力下使含有致病菌及各种病毒污水易渗入血浆袋内造成血浆污染。为减少输血反应,保障输血安全,作者经过研究,用干式法与湿式法进行了血浆融化比较。
多功能恒温解冻仪:内置循环小囊,全封闭干燥式解冻,不会有污水从肉眼很难发现的破损渗入血浆袋内。如有微漏,在干燥表面也能发现。直接用水浸泡含有致病菌和病毒的污水易从血浆袋的微破损处渗入袋内,由于袋外水分较多,较难发现。
干式解冻后血浆袋外表面干燥、标签清晰、无脱落。湿式解冻后血浆外表面潮湿因擦拭而易造成粘连、模糊、标签易脱落。干式解冻融浆箱易清洁、易**。而水温箱,不易清洁及**。温水还容易滋长大量**。干式法血浆袋外表面及操作台干燥清洁,无污水滴溅对周边环境无污染。而湿式法,血浆袋从水中捞出时,会有大量**、污水到处滴溅,造成操作台和周边环境污染。
多功能恒温解冻仪无需换水,节约水源,温度恒定,并且是智能控制操作又简单。而湿式法,水浴血液溶浆机还需经常换水,造成水源浪费及污水污染环境。
目前国内许多医院都在使用直接水浴温式融浆。将血浆袋直接放入水中浸泡解冻,从水中很容易使病原性微生物造成血液污染。有人报道输新鲜冰冻血浆后发生不佳反应率占1.7%,还有报道[1]输血浆反应率为2.9%,我院输新鲜冰冻血浆发生反应率为1.1%,2008年后减至0.58%。在上述反应中,是否与新鲜冰冻血浆融解方式不同使反应率增加之故,很值得人们高度关注。
尽管多功能恒温解冻仪优点多但是也存在缺点,融浆时间比湿式法要长10分钟,其融浆箱内保温设施还需进一步完善。
综上所述,认为干式法明显优于湿式法。为了保障输血安全,早日杜绝输血安全隐患,建议用干式法代替湿式法。
上海旌派是研发,生产,销售,服务于一体的领导厂商,是中国实验室设备的主要单位。上海旌派是中国仪器仪表协会、分析仪器协会、工业自动化仪表协会、热处理协会会员。

上海旌派干式恒温解冻仪

The detailed introduction of the dry type thermostat thawing instrument laboratory instrument products
Current thermostat (vertical) specifications: 4 blue, 6 blue, 8 blue, 10 blue, 12 Blue model: Jipad-4GL Jipad-6GL Jipad-8GL Jipad-10GL Jipad-12GL
Dry constant temperature thawing instrument - vertical product description Product description
Thermostatic defrosting apparatus, water isolation type constant temperature thawing meter is the slurry bag in the bag and the water sac between the melting water, press the start button, the hot water in the water bag automatic injection, cyclic pulping. In the process of melting, the slurry will not be exposed to water, and the dry thawing of the slurry is kept in the true sense. The whole process is fully automatic intelligent computer control, automatic temperature regulation, automatic water treatment. Dry diaphragm membrane bag is made of medical green new material, without any consumables and unlimited service life.
Dry constant temperature thawing instrument - vertical application range Application range
It is suitable for medical centers, clinical departments, hospitals, products production units, medical laboratories, automatic processing, no need for manual duty, and automatic completion of processes. It is an ideal supporting tool for saving time and convenience for medical workers. Energy conservation and reduction of water and water resources; the process of melting without using disposable plastic bags to wrap the pulp bags to protect the environment and reduce pollution.
Constant temperature thawing instrument - vertical main feature Principal character
1. Sample volume: 8, 12, 16, 20, 24 bags
2, microcomputer whole process control, bimetallic two level temperature control system, over temperature automatic alarm, and cut off power supply multiple audio-visual alarm system, standby and melting mode. Display of digital water temperature and thawing time in real time
3, automatic automatic adjustment of temperature, automatic water processing, automatic timing set time, alarm prompt when the arrival. Dry water membrane bag is made of new medical green materials with nontoxic taste and long service life.
4, automatic heating is made up of an automatic thermometer, a temperature sensor, a sensing cable and an efficient heating. The heating accuracy is over 0.5, and the specially designed water circulation system is melted away to avoid fibrin exhalation in the plasma.
5, automatic water level detection: automatic water processing, such as no connection pipe, low water level automatic alarm, and automatic stop heating, prevent dry burning.
6, the full automatic adjustment temperature: 30 C -45 C can be arbitrarily called, automatic intelligent thermometer calibration. The temperature difference of water is not more than 0.5 degrees C, which ensures the average melting of plasma. The water tank is sealed for a long time without changing water, saving the resources to reduce the burden of water exchange.
7, if the rupture of a slurry bag is wrapped in a membrane bag, it will not cause excessive leakage and pollute the water tank and the environment.
Dry constant temperature thawing instrument - vertical technical parameter Technical parameter
Model: Jipad-4GL Jipad-6GL Jipad-8GL Jipad-10GL Jipad-12GL
Style: vertical (easier to operate, no need to put a table)
Melting method: dry type water separation (current melting is required to melt with dry water isolation, no contact with the sample).
Melting temperature: 30 C ~45 C can be tempered at any time.
Thawing time: 10~20 minutes (1 columns can handle 2 bags of 100ml/200ml, -20 centigrade, flat bag).
Adjustable time: 1-99.5 minutes.
Temperature control accuracy: + 0.5.
Heating device: it consists of an automatic thermometer, a temperature sensor, a sensing cable and a high efficiency heating.
Display: the number shows the temperature of the water and the remaining time of melting.
Power: 220V/50HZ.
Power: 1800W.
Vibration mode: cycle type. Circulating pump flow: 15L
Control system: the whole process control of microcomputers, multiple audio-visual honeybee cue system, standby mode and melting mode.
Timing alarm: setting the time to arrive when the beep is prompted.
Water level detection: automatically hints at low water level and automatically stops heating.
Temperature calibration: calibrated with a standard thermometer.
Dry type thermostat - vertical model selection Model selection
The multifunction constant temperature thawing apparatus can easily destroy the leakage of the plasma bag because of its brittleness enhancement and transport turnover during the cryogenic freezing process. Because of the different degree of damage, the degree of leakage is different. When the breakage is more obvious than the ambassador's leakage, it can be found by means of naked eye observation, rubbing or extrusion. When there are damaged micropores, the plasma will not exudate because of the high plasma viscosity. Besides, the moisture outside the plasma bags will be difficult to distinguish from naked eye observation and other examinations. At this time, if water is used to soak the plasma, the plasma and osmotic pressure and the pressure of water around the plasma bag will make the pathogenic bacteria and all kinds of virus sewage permeate into the plasma bag and cause plasma contamination. In order to reduce the blood transfusion reaction and ensure the safety of blood transfusion, the author has carried out the comparison of plasma melting with dry and wet methods.
Multi-function constant temperature thawing apparatus: built-in circulating small capsule, completely closed dry thawing, no sewage from the naked eye found breakage into the plasma bag. If there is a micro leak, it can also be found on the dry surface. The wastewater containing pathogenic bacteria and viruses in direct water is easily infiltrated into the bag from the micro breakage of the plasma bag. It is difficult to find the water in the bag because of the more water outside the bag.
After dry thawing, the outer surface of the plasma bag was dry, clear and no shedding. After wet thawing, the moisture of the plasma surface is easy to cause adhesion, blurred and easy to fall off because of the wet surface of the plasma. Dry thawing thawing box is easy to clean and easy to disinfect. And the water temperature box is not easy to clean and disinfect. Warm water can also easily grow a large number of bacteria. Dry blood plasma bag surface and operating table are dry and clean, no sewage splash on the surrounding environment pollution. While the wet method, when the plasma bag is removed from the water, there will be a large number of bacteria and sewage splashing around, resulting in the pollution of the operating table and the surrounding environment.
The multi-function constant temperature thawing instrument needs no water exchange, water conservation, constant temperature, and intelligent control operation is simple.
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

沪公网安备 31011202007166号