上海旌派仪器有限公司是专业生产色谱样品前处理分析仪器的厂家，水浴氮吹仪，采用上等100%纯正铝块加工成型，全不锈钢吹扫针，进口流量控制阀，医用不锈钢试管架，一次成型，无焊接点。
产品说明:
上海旌派自主研发水浴氮吹仪用于气相、液相及质谱分析中的样品制备。它采用国际认可技术，通过将氮气吹入加热样品的表面进行样品浓缩。该方法具有省时操作方便、容易控制等特点，可很快得到预期的结果。该技术采用固相萃取前处理技术代替传统的液相萃取和层析技术，使样品得到迅速分离、净化。用氮吹代替常用的旋转蒸发仪进行浓缩，使分析时间大为缩短。
主要特征:
1.水浴氮吹仪带有的试管架可方便地将试管移出或移入水槽，并可固定在任一高度。
2.铝材精雕成型导吹支架、食品级不锈钢试管支架。
3.独立食品级不锈钢管吹扫针、迷你台湾进口山耐斯公母接头、日本原装进口软管。
技术参数:
1.型号：Jipad-DCY-12S
2.加热方式：水浴，孔数：12孔支架
3.加热功率：350W
4.温控范围：室温-100℃
5.恒温误差：±0.1℃
6.气体流量：0-5L/min
7.孔径(mm)：15
8.外形尺寸(mm):333*200*205
9.温控功能：设定、实际温度双四位数字LED显示，上限温度保护设定为80℃-110℃
厂家：上海旌派仪器有限公司
品牌：Jipad（上海旌派）
产地：上海
联系人：夏经理
厂家专线：187-2160-6967/021-61722009
上海旌派仪器有限公司网址：为你提供更多
http://www.shjipad.com/
http://www.jipad17.com/
http://www.shjpyq.com/
http://shjipad.goepe.com/
http://www.jpai17.com/
Product description:
Shanghai Jingsentindependent R & Dbathnitrogen blowing instrumentused for gas phase,liquid phaseandsample preparationin mass spectrometric analysisof preparation.It adopts theinternational recognitiontechnology,throughthe sampleconcentrationofnitrogenis blown into theheating of the sample'ssurface.This method has the features ofconvenient operation,time savingand easy to control,can quicklyget the expectedresults.The technologyusingsolid phase extractionpretreatment techniqueto replace the traditionalliquid liquid extractionandchromatography techniques,so that the samplerapidlyseparation,purification.Blowingrotary evaporatorinstead ofcommonly usedwith nitrogenconcentration,make the analysistime is shortened greatly.
The main features of:
Test tube rack1bathnitrogen blowinginstrument withcan be convenientlythe tubeout of or intothe sink,and can be fixedat any height.
The 2aviation aluminumcarvedmoldingblownbracket,food grade stainless steeltubescaffold.
3independent foodgrade stainless steel pipeblowingneedle,miniimports Taiwanshannaisimother connector,Japan importedhose.
Technical parameters:
1 type: Jipad-DCY-12S
2 heating methods:bath,hole number: 12holes of the support
The 3 heatingpower: 350W
Room temperature -100DEG Ctemperature range:4
5 constant temperatureerror: +0.1 C
6gas flow: 0-5L/min
The 7aperture(mm):15
The 8dimension(mm): 333*200*205
9temperature control function: setandactual temperaturefour digit LEDdisplay,upper limit temperatureprotectionis set as 80DEG -110 DEG
